Water Base Pavement Sign

Water Base pavement signs are easy to set up and sustain for everyday use. Often used as advertising sign, it is a Double-sided snap frame for twice the exposure, messages can be viewed from either direction. Comes with built in wheels and pull along handle to provide easy movement. Made from durable material, Heavy Base can be filled with water or sand to add extra weight.

This water base pavement sign is available  in two sizes, this sign has a snap frame mechanism for easy poster change and a plastic PVC Cover which project against rain.

Pavement signs are a great way to attract customers into your store and are often used as advertising sign.

Set-up
Frame Assembly for the Water Base Pavement Sign 

1. Lay frame on its side and base on end as shown 
2. Place washer on bolt fastener
3. Insert bolt fastener through hole in bottom of base 
4. Align spring assembly with bolt fastener
5. Screw bolt fastener into bottom of corresponding spring assembly, tighten 
6. Repeat for second bolt fastener, washer, and spring assembly
7. Turn sign frame upright, with base flat on the ground and insert the graphics print into the snap frame.
8. Unscrew cap and pour dry sand into base. Sand should be level inside of base to maintain optimum balance. Shake gently to level sand.

Snap Frame Sign Insertion 

1. Snap open all four sides profiles upward.
2. Remove clear protective cover from frame.
3. Place Poster in the frame, inserting poster into the four corner slots
4. Place clear protective poster cover in frame, inserting cover corners into the four corner slots
5. Snap close all four sides.

Please – use caution when you snap rails open and close. To move sign stand from place to place – grab frame, tilt stand back on wheels, and push sign to move it

Graphic panel is replaceable. Kindly contact us if you need a new print.

Do you need other frames, kindly request a quote or click to order.